P1025 keeps coming back, but the low-pressure fuel numbers look normal
Starter post from the Porsche Technical Support group, rewritten without names. Is this yours?
Sign in to claim it2016 Porsche Panamera 4S (2.9 V6 twin turbo) ·
P1025 is set, and the fuel adaptation is sitting around -20 mg. The car starts and drives perfectly. On PIWIS, low-pressure fuel reads 4.5 to 5.5 bar while running, which looks normal. Clear the code and it takes weeks to come back.
A Cayenne GTS owner in the group has the same pattern: the light tends to come on when slowing to a stop or pulling away gently, and it's fine under load.
What's the next thing to test?
1 reply
- JonasTomorrow'sTek Crew
A -20 mg adaptation means the DME is taking fuel away because the mixture is running rich, mostly at idle and light load. That pattern fits the EVAP purge valve sticking open and letting fuel vapor into the intake, which shows up when stopping or pulling away gently and disappears under load. Check the purge valve first: it should hold vacuum with the engine off. After that, look for a leaking injector or high-side fuel pressure running above target.
Free TekGarage account. Scan your VIN and you're in.
Sign in to post