Skip to content
Tomorrow'sTek
DIY Repair

Porsche Macan Hood Shocks Replacement DIY easy

Is your Porsche Macan hood falling down or no longer staying fully open?

Porsche Macan Hood Shocks Replacement DIY easyWatch on YouTube ↗

Is your Porsche Macan hood falling down or no longer staying fully open?

In this video, I show you how to replace the hood lift supports—also called hood shocks, hood struts, or gas springs—on a Porsche Macan. This is a quick DIY repair that requires very few tools and can be completed in just a few minutes.

This repair may apply to multiple Porsche Macan model years. Always confirm compatibility with your exact year, trim, and vehicle before ordering.

Step by step

  • 1. Open the hood and securely support it with a prop rod or have someone hold it.
  • 2. Locate the hood struts on both sides of the engine bay.
  • 3. Release the retaining clip on the upper end of the old strut using a small flathead screwdriver.
  • 4. Pull the strut off the upper ball stud.
  • 5. Repeat on the lower end and remove the old strut.
  • 6. Install the new strut by pressing each socket onto its ball stud until it clicks into place.
  • 7. Repeat on the opposite side. Always replace hood struts in pairs.
  • 8. Test the hood by slowly lowering and raising it, ensuring it stays fully open without assistance. Tools needed: Small flathead screwdriver and a secure hood support.

Estimated time: 5–10 minutes.

Important: Never remove both struts without supporting the hood.

Sources

  1. Porsche Macan Hood Shocks Replacement DIY easyTomorrow’sTek on YouTube · August 4, 2026 · accessed November 12, 2026Primary

Topicsmacan hood shocks · macan hood strut replacement · macan repair · porsche diy repair · porsche macan diy · porsche macan hood lift support · porsche macan hood shock replacement · porsche macan hood shocks · porsche macan hood struts · porsche macan maintenance

Filed underDIY Repair

Published by

The Tomorrow’sTek Editorial Team

About Tomorrow’sTek →